BCLST - 31 FLO-THRU SEWER SOLVENT

  • MSDS: BCLST
  • Manufacturer: HILL MANUFACTURING CO INC
  • Product Name: 31 FLO-THRU SEWER SOLVENT
  • National Stock Number: 6850-00N006004
Product Identification

Product ID:31 FLO-THRU SEWER SOLVENT
MSDS Date:01/01/1985
FSC:6850
NIIN:00N006004
MSDS Number: BCLST

Responsible Party
HILL MANUFACTURING CO.,INC

Emergency Phone: 404-522-8364

Cage: 66086

Contractor
HILL MFG CO,INC
ATLANTA, GA 30315 US

Telephone: 404-522-8364

Cage: 9U931

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SODIUM NITRATE

CAS: 7631-99-4

RTECS: WC5600000


ALUMINUM FILINGS


PURPLE DYE

Hazards

Effects of Overexposure:EYE/SKIN: DESTRUCTIVE,PRODUCE SEVERE BURN. DUST
INHALATION: RESPIRATORY TRACT INJURY.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MIN,GET IMMEDIATE MED ATTN. SKIN:
FLUSH WITH WATER,REMOVE CONTAMINATED CLOTHING & SHOES,LAUNDRY
BEFORE RE-USE. INGESTION: DO NOT INDUCE VOMITING,GIVE WATER &
VINEGAR,IF CONSCI OUS,CALL A PHYSICIAN.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:SELF-CONTAINED BREATH APP

Accidental Release

Spill Release Procedures:SHOVEL UP IF SPILLED,FOLLOWED BY FLUSHING WITH
WATER. DILUTE ACETIC ACID MAY BE USED TO NEUTRALIZE FINAL TRACES OF
FLO-THRU IMMEDIATELY AFTER FLUSHING.

Handling

Handling and Storage Precautions:WEAR SAFETY EQUIPMENT WHEN HANDLING
FLO-THRU. AVOID CONTANT WITH EYES OR SKIN & BREATHING DUST. DO NOT
TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL TO PREVENT DUST ACCUMULATION
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLE
Other Protective Equipment:RUBBER BOOTS W/SAFETY TOE,RUBBER APRON,PUC
CLOTH*SEE SUP DAT
Supplemental Safety and Health
*"HARD" HAT,SAFETY SHOWER,EYE-WASHING FOUNTAIN.

Chemical Properties

Solubility in Water:APPRECIABLE
Appearance and Odor:PURPLE COLOR FLAKE WITH ALUMINUM CHIPS DISPERSED

Stability

Stability Indicator/Materials to Avoid:YES
ORGANIC MATERIALS

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
DO NOT DISCHARGE DIRECTLY INTO SEWERS OR STREAMS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.